THIS RIGHT HAND MUFFLER USES 2.5″ RISER PART NUMBER A0450338-70

CESSNA PART NUMBER 0450400-26 IS REPLACE BY FAA APPROVED NEW PMA PART NUMBER A0450400-26

****IF YOU HAVE MUFFLER PART NUMBER 0450400-4 ORDER PMA PART NUMBER A0450400-26 AND PMA EXHAUST RISER PART A0450338-70

****MAY NOT BE APPLICABLE TO YOUR AIRCRAFT

FITS CESSNA MODELS:

150 S/N 15067199 and on

A150 S/N A1500001 and on

This Right Hand Muffler is manufactured using high grade 321 stainless steel and provides reliable service and resist corrosion in high temperature exhaust system conditions.  

AIRCRAFT MAKE / MODEL: CESSNA 150 AND CESSNA 120 /140 /140A CONVERSION FROM PANCAKE MUFFLER SYSTEM

PARTS CATEGORY:  RIGHT HAND MUFFLER

RISER: USES 2.5″ RISER PART NUMBER A0450338-70

MATERIALS: 321 STAINLESS STEEL

ATTACHMENT: 2 BOLT FLANGE WITH CADMIUM STUD NUTS

PART CONDITION: FAA APPROVED NEW PMA

THIS MUFFLER IS AN AWI FAA APPROVED PMA REPLACEMENT FOR CESSNA PART NUMBER 0450400-26 AND FITS CESSNA 150 SERIAL NUMBER 15067199 AND ON AND A150 SERIAL NUMBER A1500001 AND ON

STC PAPERWORK FOR CESSNA 150 CONVERSION www.150MUFFLERSTC.COM

AWI PMA PARTS ARE FOR 1970 K MODELS AND NEWER. IF OLDER THAN 1970, VERIFY RIGHT HAND RISER LENGTH. IF RIGHT HAND RISER LENGTH IS 2.5″, AWI PMA PART WILL WORK. IF RIGHT HAND RISER LENGTH IS 3.75″ USE AWI PMA PART NUMBER A0450338-14 WITH MUFFLER LEFT HAND SHROUDS COME IN TWO STYLES, ONE HAS TWO (2″) PORTS AND THE OTHER HAS ONE (2″) PORT AND ONE (3″) PORT

AD 67-03-01 – REQUIRES PRESSURE TESTING EVERY 100 HOURS

AWI new, overhauled and repaired parts meet the FAA airworthiness requirements.  This Right Hand Muffler may be purchased individually or it may be purchased as part of the Cessna 150 Conversion Kit, which includes 2 mufflers, 2 risers, 2 tailpipes, 2 shrouds, gaskets, riser clamps, tailpipe clamps and attaching hardware

 

Front of Aircraft →

 

Item	Part #	Description	Condition
01	A0450400-3	MUFFLER – LH – 2 BOLT FLANGE – 1970 AND NEWER	NEW PMA
02	A0450400-26	MUFFLER – RH – 2 BOLT FLANGE – 1970 AND NEWER	NEW PMA
03	A0450338-69	RISER – LH CURVED – 2 BOLT FLANGE	NEW PMA
04	A0450338-70	RISER – RH – STRAIGHT – 2.5″ – 2 BOLT FLANGE	NEW PMA
05	A0450338-67	TAILPIPE – LH	NEW PMA
06	A0450338-66	TAILPIPE – RH	NEW PMA
07	A0450400-200	SHROUD – MUFFLER – LH – (2)-2″ PORTS	NEW PMA
07	A0450400-201	SHROUD – MUFFLER – LH – (1) 2″ PORT AND (1) 3″ PORT	NEW PMA
08	A0450400-6	SHROUD – MUFFLER – RH	NEW PMA
09	0550176-50	RISER CLAMP SET WITH HARDWARE – INCLUDES BOTH HALVES	NEW
10	A0450338-9	CLAMP – TAILPIPE – WITH PIN	NEW PMA
11	A0450338-10	CLAMP – TAILPIPE – NO PIN	NEW PMA
12	MS27405-16P	CLAMP – TAILPIPE HANGER	NEW PMA
N/S	627429	CYLINDER GASKET WITH HARDWARE	NEW