Aircraft engines rely on a wide range of components to operate safely and efficiently. One of the most critical of these components is the magneto, which plays a vital role in the ignition system of the engine. The PowerUp magneto which is manufactured by Hartzell Engine Tech and is a direct replacement for Slick magnetos, is a great choice for many aircraft engines due to its reliability and high performance.

To ensure that your magneto continues to operate effectively, it is crucial to perform regular maintenance and inspections. One of the most important of these is the 500-hour inspection.

During the 500-hour inspection, a thorough examination of the magneto is carried out to ensure that it is still functioning within its acceptable limits. This involves checking for wear and tear, signs of corrosion, and other potential issues that could affect its performance. If any problems are found, they can be addressed before they lead to more serious issues that could compromise the safety of the aircraft.

The 500 hour inspection may include the following steps:

• Clean and inspect all internal and external components
• Check the condition of the distributor block and points
• Inspect the condition of the bearings and bushings
• Test the operation of the impulse coupling
• Check the ignition timing
• Replace any worn or damaged parts
• Reassemble and install the magneto
• Conduct a functional test to ensure the magneto is operating properly
• Document the inspection and any maintenance or repairs performed

Who performs your Slick Magneto inspection is probably the most important factor of the inspection itself.

QAA’s 500 hour Inspection includes replacement of all wear parts:

• Contact Points
• Carbon Brush
• Capacitor
• Impulse Spring
• Cotter Pin
• Pinion Gear
• Rotor Gear (as required)

To carry out the 500-hour inspection on a Slick magneto, it is essential to use an FAA approved repair station like Quality Aircraft Accessories. QAA has the expertise and knowledge necessary to conduct a comprehensive inspection and maintenance process, ensuring that the magneto meets all required standards and is operating at optimal levels.

With a QAA 500 Hour Inspection customers can be assured that:

• 100% Service Bulletin (SB) compliance
• All work is performed in accordance with most current manual
• Genuine Champion factory hardware is used
• No PMA replacement parts
• “Repaired” 8130 provided with each 500-hour inspection
• 500-hour warranty with no calendar time
• Product liability ensuring peace of mind
• Cost effective vs. in house

QAA work was in accordance with Champion Aerospace Instructions L-1363J Rev J.

As the FAA requires these inspections to be carried out regularly, it’s crucial to choose a reliable and experienced service center that can perform the necessary inspections with precision and accuracy. The 500-hour inspection of a Slick magneto is a critical process that should not be overlooked.

Back to view all blog posts